Abstract：
Real-time, automatic, and accurate determination of seismic signals is critical for rapid earthquake reporting and early warning. In this study, we present a correction trigger function (CTF) for automatically detecting regional seismic events and a fourth-order statistics algorithm with the Akaike information criterion (AIC) for determining the direct wave phase, based on the differences, or changes, in energy, frequency, and amplitude of the direct P- or S-waves signal and noise. Simulations suggest for that the proposed fourth-order statistics result in high resolution even for weak signal and noise variations at different amplitude, frequency, and polarization characteristics. To improve the precision of establishing the S-waves onset, first a specific segment of P-wave seismograms is selected and the polarization characteristics of the data are obtained. Second, the S-wave seismograms that contained the specific segment of P-wave seismograms are analyzed by S-wave polarization filtering. Finally, the S-wave phase onset times are estimated. The proposed algorithm was used to analyze regional earthquake data from the Shandong Seismic Network. The results suggest that compared with conventional methods, the proposed algorithm greatly decreased false and missed earthquake triggers, and improved the detection precision of direct P- and S-wave phases.
LIU Xi-Qiang,CAI Yin,ZHAO Rui et al. An automatic seismic signal detection method based on fourth-order statistics and applications[J]. APPLIED GEOPHYSICS, 2014, 11(2): 128-138.
[1]
Amoroso, O., Maercklin, N., and Zollo, A., 2012, S-wave identification by polarization filtering and waveform coherence analyses: Bulletin of the Seismological Society, America, 102, 854 - 861.
[2]
Anant, S. K., and Dowla, F. U., 1997, Wavelet transform methods for phase identification in three-component seismogram: Bulletin of the Seismological Society, America, 87, 1598 - 1612.
[3]
Allen, R.V., 1978, Automatic earthquake recognition and timing from single traces: Bulletin of the Seismological Society, America, 68, 1521 - 1532.
[4]
Allen, R. V., 1982, Automatic phase pickers: their present use and future prospects: Bulletin of the Seismological Society, America, 72, 225 - 242.
[5]
Aster, R., Shearer, P., and Berger, J., 1990, Quantitative measurements of shear wave polarizations at the Anza seismic network, southern California: implications for shear wave splitting and earthquake prediction: J. Geophys. Res., 95, 12449 - 12473.
[6]
Baer, M., and Kradolfer, U., 1987, An automatic phase picker for local and teleseismic events: Bulletin of the Seismological Society, America, 77, 1437 - 1445.
[7]
Bai, C.Y., and Kennett, B. L. N., 2000, Automatic phase-detection and identification by full use of a single three-component broadband seismogram: Bulletin of the Seismological Society, America, 90, 187 - 198.
[8]
Cichowicz, A., 1993, An automatic S-phase picker: Bulletin of the Seismological Society, America, 83, 180 - 189.
[9]
Earle, P.S., and Shearer, P.M., 1994, Characterization of global seismograms using an automatic-picking algorithm: Bulletin of the Seismological Society, America, 84, 366 - 376.
[10]
Gentili, S., and Michelini, A., 2006, Automatic picking of P and S phases using a neural tree: J. Seismol., 10, 39-63.
[11]
He, Y., Jin, P., Xiao,W. G., and Wang, H. C., 2014, A comparative study between ICSS and AR-AIC algorithms on onset time estimation for seismic signals: Acta Seismologica Sinica (in Chinese), 36, 209 - 219.
[12]
Hildyard, M. W., Nippress, S. E. J., and Rietbrock, A., 2008,Event detection and phase picking using a time-domain estimate of predominate period Tpd: Bulletin of the Seismological Society, America, 98, 3025 - 3032.
[13]
Joswig, M., 1990, Pattern recognition for earthquake detection: Bulletin of the Seismological Society, America, 80, 170 - 186.
[14]
Kanamori, H., 2005, Real-time seismology and earthquake damage mitigation: Ann. Rev. Earth Planet. Sci. 33, 195 - 214.
[15]
Küperkoch, L., Meier, T., Lee, J., Friederich, W., and EGELADOS Working Group,2010, Automated determination of P-phase arrival times at regional and local distances using higher order statistics: Geophys. J. Int., 181, 1159 - 1170.
[16]
Küperkoch, L., Meier, T., Brüstle, A., Lee, J., Friederich, W., and EGELADOS working group, 2012, Automated determination of S-phase arrival times using autoregressive prediction: application to local and regional distances: Geophys. J.Int., 188, 687 - 702.
[17]
Leonard, M., and Kennett, B. L. N., 1999, Multi-component autoregressive techniques for the analysis of seismograms: Phys. Earth Planet. Int., 113, 247 - 263.
[18]
Leonard, M., 2000, Comparison of manual and automatic onset time picking: Bulletin of the Seismological Society, America, 90, 1384 - 1390.
[19]
Liu, X. Q., Zhou, Y.W., Qu, J.H., Shi, Y.Y., and Li, B.,2009, Real-time detection of regional events and automatic P-phase identification from the vertical component of a single station record: Acta Seismologica Sinica, 31, 260 - 271.
[20]
Maeda, N., 1985, A method for reading and checking phase times in autoprocessing system of seismic data: Zisin = Jishin, 38, 365 - 379.
[21]
Mousset, E., Cansi, Y., Crusem, R., and Souchet, Y., 1996, A connectionist approach for automatic labeling of regional seismic phases using a vertical component seismogram: Geophys. Res. Lett., 23, 681 - 684.
[22]
Odaka, T., Ashiya, K., Tsukada, S., Sato, S., Ohtake, K., Nozaka, D., 2003, A new method of quickly estimating epicentral distance and magnitude from a single seismic record: Bulletin of the Seismological Society, America, 93, 526 - 532.
[23]
Qu, B. A., Liu, X. Q., Cai, Y., Fan, X. Y., Lin, X. E., Yu, Q. M., Zhao, R., Li, B., and Zhou, Y. W., 2014, Method for real-time automatic identification of S-phase: application to local seismicity: Acta Seismologica Sinica (in Chinese), 36, 200 - 208.
[24]
Saragiotis, C. D., Hadjileontiadis, L.J., and Panas, S.M., 2002, PAI-S/K: a robust automatic seismic P-phase arrival identification scheme: IEEE Trans. Geosci. Remote Sens., 40, 1395 - 1404.
[25]
Sleeman, R., & van Eck, T., 1999, Robust automatic P-phase picking: an online implementation in the analysis of broadband seismogram recordings: Phys. Earth planet. Inter., 113, 265 - 275.
[26]
Vassallo, M., Satriano, C., and Lomax, A., 2012, Automatic picker developments and optimization: A strategy for improving the performances of automatic phase pickers: Seismological Research Letters, 83, 541 - 554.
[27]
Wang, J., and Teng, T. L., 1997, Identification and picking of S phase using an artificial neural network: Bulletin of the Seismological Society, America, 87, 1140 - 1149.
[28]
Zhang, H. J., Thurber, C., and Rowe, C., 2003, Automatic P-wave arrival detection and picking with multiscale wavelet analysis for single-component recordings: Bulletin of the Seismological Society, America, 93, 904 - 912.
2014, Vol. 11 
