Abstract：
To minimize the number of solutions in 3D resistivity inversion, an inherent problem in inversion, the amount of data considered have to be large and prior constraints need to be applied. Geological and geophysical data regarding the extent of a geological anomaly are important prior information. We propose the use of shape constraints in 3D electrical resistivity inversion. Three weighted orthogonal vectors (a normal and two tangent vectors) were used to control the resistivity differences at the boundaries of the anomaly. The spatial shape of the anomaly and the constraints on the boundaries of the anomaly are thus established. We incorporated the spatial shape constraints in the objective function of the 3D resistivity inversion and constructed the 3D resistivity inversion equation with spatial shape constraints. Subsequently, we used numerical modeling based on prior spatial shape data to constrain the direction vectors and weights of the 3D resistivity inversion. We established a reasonable range between the direction vectors and weights, and verified the feasibility and effectiveness of using spatial shape prior constraints in reducing excessive structures and the number of solutions. We applied the prior spatially shape-constrained inversion method to locate the aquifer at the Guangzhou subway. The spatial shape constraints were taken from ground penetrating radar data. The inversion results for the location and shape of the aquifer agree well with drilling data, and the number of inversion solutions is significantly reduced.
LI Shu-Cai,NIE Li-Chao,LIU Bin et al. 3D electrical resistivity inversion using prior spatial shape constraints[J]. APPLIED GEOPHYSICS, 2013, 10(4): 361-372.
[1]
Abedi, M., Torabi, S. A., Norouzi, G. H., and Hamzeh, M., 2012, ELECTRE III: A knowledge-driven method for integration of geophysical data with geological and geochemical data in mineral prospectivity mapping: Journal of Applied Geophysics, 87, 9 - 18.
[2]
Bouchedda, A., Chouteau, M., Binley, A., and Giroux, B., 2012, 2-D joint structural inversion of cross-hole electrical resistance and ground penetrating radar data: Journal of Applied Geophysics, 78, 52 - 67.
[3]
Doetsch, J., Linde, N., Pessognelli, M., Green, A. G., and Gunther, T., 2012, Constraining 3-D electrical resistance tomography with GPR reflection data for improved aquifer characterization: Journal of Applied Geophysics, 78, 68 - 76.
[4]
Gallardo, L. A., and Meju, M. A., 2003, Characterization of heterogeneous near-surface materials by joint 2D inversion of dc resistivity and seismic data: Geophysical Research Letters, 30(13), 1-1 - 1-4.
[5]
Huang, J. G., Ruan, B. Y., and Bao, G. S., 2004, Resistivity inversion on 3-D section based on FEM: Journal of Centre-South University of Technology (Natural Science) (in Chinese), 35(2), 295 - 299.
[6]
Jegen, M. D., Hobbs, R. W., Tarits, P., and Chave, A., 2009, Joint inversion of marine magnetotelluric and gravity data incorporating seismic constraints Preliminary results of sub-basalt imaging off the Faroe Shelf: Earth and Planetary Science Letters, 282(1), 47 - 55.
[7]
Kim, H. J., Song, Y., and Lee, K. H., 1999, Inequality constraint in least-squares inversion of geophysical data: Earth Planets Space, 51, 255 - 259.
[8]
Kaipio, J. P., Kolehmainen, V., Vauhkonen, M., and Somersalo, E., 1999, Inverse problems with structural prior information: Inverse Problems, 15(3), 713 - 729.
[9]
Li, Y. G., and Oldenburg, D. W., 2000, Incorporating geological dip information into geophysical inversions : Geophysics, 65(1), 148 - 157.
[10]
Li, Y. G., and Oldenburg, D. W., 2003, Fast inversion of large-scale magnetic data using wavelet transforms and logarithmic barrier method: Geophysical Journal International, 152, 251 - 265.
[11]
Liu, B., Nie, L. C., Li, S. C., Xu, L., Liu, Z. Y., Song, J., Li, L. P., and Lin, C. J., 2012, 3d electrical resisitivity inversion tomography with spatial structural constraint: Chinese Journal of Rock Mechanics and Engineering. 31(11), 2258 - 2268.
[12]
Ruan, B. Y., 2001, A generation method of the partial derivatives of the apparent resistivity with respect to the model resistivity parameter: Geology and Prospecting, 37(1), 39 - 41.
[13]
Sasaki, Y., 1994, 3D resisitivity inversion using the finite-element method: Geophysics, 59(11), 1839 - 1848.
[14]
Saunders, J. H., Herwanger, J. V., Pain, C. C., Worthington, M. H., and Oliveira, C. R. E. E., 2005, Constrained resistivity inversion using seismic data: Geophysical Journal International, 160(3), 785 - 796.
[15]
Yang, W. C., 1997, Theory and Methods of Geophysical Inversions: Beijing: Geological Publishing House.
2013, Vol. 10 
|
