APPLIED GEOPHYSICS
 
        Home  |  Copyright  |  About Journal  |  Editorial Board  |  Indexed-in  |  Subscriptions  |  Download  |  Contacts Us  |  中文
APPLIED GEOPHYSICS  2025, Vol. 22 Issue (2): 305-318    DOI: 10.1007/s11770-024-1166-8
article Current Issue | Next Issue | Archive | Adv Search Previous Articles  |  Next Articles  
Construction of the dynamic measurement algorithm for well inclination and azimuth in strapdown stable platform
Feng Sun, Rui Zhang*, Yi-feng Wang, Wei Chen, Hui-dong Mu, Rui-wen Feng
1. SINOPEC Research Institute of Petroleum Engineering Co., LTD, Beijng 102206, China 2. State Key Laboratory of Shale Oil and Gas Enrichment Mechanisms and Eff ective Development, Beijng, 102206, China 3. College of Petroleum Engineering, China University of Petroleum (Hua Dong), Qingdao, 266580, China 4. Geosteering & Logging Research Institute, Sinopec Matrix Corporation, Qingdao, 266071, China
 Download: PDF (0 KB)   HTML ( KB)   Export: BibTeX | EndNote (RIS)      Supporting Info
Abstract For strapdown stabilized platform used in automatic vertical drilling system, a new dynamic measurement algorithm based on three-axis accelerometer and three-axis fluxgate measurement signals is proposed and simulated under the condition of small inclination dynamic rotation. The error compensation algorithm is also proposed. The bench test of strapdown stabilized platform is designed and carried out. The results show that: When the azimuth angle is the same, the larger the inclination angle is, the greater the error of the measurement results will be. When the inclination angle is the same, the measurement error is the largest when the azimuth angle is 90° and 270°, and the measurement error curve presents a sinusoidal change with the change of azimuth angle. After the error function compensation, the error curve between the calculation results and the true value is basically not affected by the inclination angle and the azimuth angle, and the calculation accuracy is significantly improved. Under the random rotating speed of 0-180 rpm, the minimum error of the measured well inclination value was no more than 0.03° and the maximum was no more than 1.58°.The feasibility of the proposed dynamic azimuth measurement algorithm is verifi ed. This article provides a technical reference for the strapdown automatic drilling system.
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Key wordsAutomatic vertical drilling system    Strapdown stabilized platform    Dynamic measurement    Bench test     
Received: 2024-10-15;
Fund: The financial supports from National key plan project for research and development of China (2019YFA0708300) and (2023YFC3009200) are highly appreciated.
Corresponding Authors: Rui Zhang (Email: zhangrui@upc.edu.cn).   
 E-mail: zhangrui@upc.edu.cn
About author: About the author: Sun Feng (1975--), male, Dongying, Shandong Province, graduated from Process Control and Equipment major of China University of Petroleum (East China) in 1997, and received his doctor degree of oil and gas well Engineering major of China University of Petroleum (East China) in 2012. He is a senior engineer, Measurement and Control and Equipment Center of Sinopec Research Institute of Petroleum Engineering Technology Co., LTD. He is mainly engaged in the research of measurement and control technology and equipment while drilling.
Cite this article:   
. Construction of the dynamic measurement algorithm for well inclination and azimuth in strapdown stable platform[J]. APPLIED GEOPHYSICS, 2025, 22(2): 305-318.
 
No references of article
No Similar of article
Copyright © 2011 APPLIED GEOPHYSICS
Support by Beijing Magtech Co.ltd support@magtech.com.cn