Abstract In the mining process of deep metal mines, different types of rock mass instability failures are caused by strong mining disturbance. It is beneficial to master the fracture mechanism of rock mass in time to effectively prevent and control the ground pressure disasters. Microseismic signals are generated by the propagation and expansion of cracks inside the rock mass that contain plentiful information about the structural changes of rock mass. The ratio of the radiated energy of S and P waves (Es/Ep) of microseismic events can fast and effectively calculate the rock fracture mechanism, which is widely used for ground pressure hazard risk assessment. In this paper, this method was used to analyze the fracture mechanism of rock mass around deep stope in Hongtoushan copper mine and Ashele copper mine. Furthermore, the spatial distribution characteristics and proportion changes of microseismic events with different fracture mechanisms along with the mining process were studied. The results show that tensile cracks play a dominant role, accounting for 62% of the total events, during non-shear fracturing of the rock mass caused by the stoping unloading effect, while shear cracks occupy 68% of the total events during orebody slip failure. When the physical and mechanical properties of the orebody and rock mass are signifi cantly different, slip failure along their contact zone is prone to occur under blasting disturbance. During deep mining, it is necessary to control the exposed area of the roof by each stoping, especially during the earlier mining stage, to avoid tensile stress concentration. The temporal and spatial variation of tension cracks and shear cracks induced by roof damage obtained in this paper can guide the prevention and control of ground pressure disasters in deep mining eff ectively.
This work was fi nancially supported by the National Key Research and Development Program of China (2017YFC0602904),the National Natural Science Foundation of China (51974059), and the Fundamental Research Funds for the Central Universities (N180115010).
Corresponding Authors: Liu Jian-po (Email: liujianpo@mail.neu.edu.cn).
E-mail: liujianpo@mail.neu.edu.cn
About author: Liu Jian-po, Associate professor, studied in Northeastern University from 2002 to 2011, He is presently working in Key Laboratory of Ministry of Education on Safe Mining of Deep Metal Mines of Northeastern University. He is mainly engaged in the research and application of mine microseismic monitoring technology.
Cite this article:
. Estimation of fracturing mechanisms by the ratio of radiated energy between S and P waves of microseismic events during mining in metal mines*[J]. APPLIED GEOPHYSICS, 2020, 17(3): 465-474.
2020, Vol. 17 
