Crack fluid identification of shale reservoir based on stress-dependent anisotropy
Zhang Jia-Jia, Zhang Guang-Zhi, and Huang Lan-Hua
1. School of Geosciences, China University of Petroleum (East China), Qingdao 266580, China
2. Laboratory for Marine Mineral Resources, Qingdao National Laboratory for Marine Science and Technology, Qingdao,Shandong, China
Abstract Shale reservoirs are typically very tight, and crack are only a small part of the reservoir. The directional arrangement of cracks leads to the anisotropic characteristics of shale, and the type of fluid filled in cracks affects the shale reservoir evaluation and late development. Many rock physics theories and methods typically use second- and fourthorder crack density tensors to characterize the elastic anisotropy induced by cracks as well as the normal-to-tangential crack compliance ratio to distinguish between dry and saturated cracks. This study defines an anisotropic crack fluid indicator for vertical transversely isotropy (VTI) media with vertical symmetry axis which is the integration of the normal-to-tangential crack compliance ratio in three directions. A new dimensionless fourth-order tensor, including crack fluid type, azimuth distribution, and geometric shape, is constructed by substituting the normal and tangential compliance into the fourth-order crack density tensor, which can also be used to identify the type of crack fluid in the VTI media. Using the Callovo–Oxfordian shale experimental data, the variation of the elastic properties of dry and saturated shale samples with axial stress is analyzed. The results demonstrate that the anisotropic crack fluid indicator of water-bearing shale samples is less than that of the dry shale samples and that the dimensionless fourth-order tensor of water-bearing shale samples is nearly one order of magnitude greater than that of the dry shale samples. Therefore, the anisotropic crack fluid indicator and dimensionless fourth-order tensor can reflect the crack fluid type in shale samples and can be used for shale reservoir prediction and fluid identification.
This work was supported by the National Natural Science Foundation of China (Nos. 41874146, 41674130), National Key S&T Special Project of China (No. 2017ZX05049-002, 2016ZX05027-004-001), the Fundamental Research Funds for the Central University (No. 18CX02061A), the Innovative Fund Project of China National Petroleum Corporation (No. 2016D-5007-0301) and the Scientific Research & Technology Development Project of China National Petroleum Corporation (No.2017D-3504).
About author: Zhang Jia-Jia graduated from Ocean University of China with a bachelor ’s degree in geoscience information in 2007,graduated from Ocean University of China with a master’s degree in earth exploration and information technology in 2010, and graduated from Research Institute of Petroleum Exploration and Development, PetroChina with a doctor’s degree in earth exploration and information technology in 2013. Currently, he is a lecturer in China University of Petroleum (East China). His main research interests are seismic rock physics theory and experiment. E-mail: zhangjj@upc.edu.cn
Cite this article:
. Crack fluid identification of shale reservoir based on stress-dependent anisotropy[J]. APPLIED GEOPHYSICS, 2019, 16(2): 221-230.
2019, Vol. 16 
