Abstract：
Seismic exploration in the mountainous areas of western Chinese is extremely difficult because of the complexity of the surface and subsurface, which results in shooting difficulties, seismic data with low signal-to-noise ratio, and strong interference. The complexity of the subsurface structure leads to strong scattering of the reflection points; thus, the curved-line acquisition method has been used. However, the actual subsurface structural characteristics have been rarely considered. We propose a design method for irregular acquisition based on common reflection points (CRP) to avoid difficult-to-shoot areas, while considering the structural characteristics and CRP positions and optimizing the surface-receiving line position. We arrange the positions of the receiving points to ensure as little dispersion of subsurface CRP as possible to improve the signal-to-noise ratio of the seismic data. We verify the applicability of the method using actual data from a site in Sichuan Basin. The proposed method apparently solves the problem of seismic data acquisition and facilitates seismic exploration in structurally complex areas.
Zhao Hu,Yin Cheng,He Guang-Ming et al. Research of CRP-based irregular 2D seismic acquisition[J]. APPLIED GEOPHYSICS, 2015, 12(1): 73-78.
[1]
Amarjeet, K., and Gerrit, B., 2013, Including secondary illumination in seismic acquisition design: SEG Technical Program Expanded Abstracts, 181−185.
[2]
Regone, C. J., 2007, Using 3D finite-difference modeling to design wide-azimuth surveys for improved subsalt imaging: Geophysics, 72(5), 231−239.
[3]
Gijs, J. Vermeer., 2010, 3D symmetric sampling of sparse acquisition geometries: 80th Ann. Internat. Mtg, Soc. Expl. Geophys. Expanded Abstracts, 3796−3801.
[4]
Gou, L., and He, Z. H., 2005, Analysis of trend to complex mountainous exploration in west of China: Oil Geophysical Prospecting (in Chinese), 40(2), 248−251.
[5]
Guo, L. H., and Tian, X. P., 2006, Application of crooked-line seismic acquisition technology in Loess Plateau area of coalfield: Coal Geology of China. 18(6), 43−45.
[6]
He, Y. Q., Tang, D. L., and Tang, H. Z., 2003, A wide line acquisition case for overthrustnappe structure of Kulong Mountain in Jiuquan basin: 73th Ann. Internat. Mtg, Soc. Expl. Geophys. Expanded Abstracts, 22, 19−21.
[7]
Lindsey, J. P., 1991, Crooked lines and taboo places: What are the rules that govern good line layout: The Leading Edge, 10(11), 74−77.
[8]
Liu, Y. M., Yang, J. Y., and Liang, X. H., 2008, Xianghao Liang, Seismic acquisition techniques in complex mountainous areas: Case study in Kuqa Foreland Basin, western China: 80th Ann. Internat. Mtg, Soc. Expl. Geophys. Expanded Abstracts, 139−143.
[9]
Wang, X. C., and Liu, X.W., 2007, 3-D acoustic wave equation forward modeling with topography: Applied Geophysics, 4(1), 8−15.
[10]
Wei, W., Fu, L.Y., and Blacquiere, G., 2012, Fast multifrequency focal beam analysis for 3D seismic acquisition geometry: Geophysics, 77(2), 11−21.
[11]
Wei, W., and Fu, L.Y., 2014, On horizontal resolution for seismic acquisition geometries in complex 3D media: Journal of Applied Geophysics, 108, 43-52.
[12]
Wu, J. J., 1996, Potential pitfalls of crooked-line seismic reflection surveys: Geophysics, 61(1), 277-281.
[13]
Zhu, J. P., Dong, L. G., and Cheng, J. B., 2011, Target-oriented 3D seismic optimal geometry design based on seismic illumination: Oil Geophysical Prospecting (in Chinese), 46(3), 339-348.
2015, Vol. 12 
